Operation of hands-free phoning, Call waiting, Connecting a bluetooth device – Kenwood KDC-6051U Benutzerhandbuch
Seite 24: During a call, Receiving a call
24
|
KDC-BT61U/ KDC-6051U
Operation of hands-free phoning
Function of KDC-BT61U
KDC-6051U with KCA-BT300/ KCA-BT200 (Optional Accessory)
Connecting a Bluetooth Device
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit. The following
3 steps procedure is necessary.
Step 1.
Pairing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering a this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD BT
CD/R-4P1”/ “KCA-BT300”/ “KCA-BT200” from the list
of connected units.
3
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍
PIN code is set to “0000” as the default. You can
change this code. Refer to
4
By operating the Bluetooth device, start hands-
free connection.
Step 2.
Connection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details,
<Selecting the Bluetooth device You Wish to
When a cell-phone is connected, the “BT” indicator
is light up.
Step 3.
Hands-free phoning
You can do hand-free phoning when the
connection is made.
⁄
• When registering from this unit, refer to
.
• For details on the Bluetooth cell-phone with the hands-
free function, see
<About the Cell-Phone> (page 57)
Receiving a Call
Answering a Phone Call
Press the [VOL] knob.
⁄
• The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button or press the [
] / [TI]
button for at least 1 second.
During a Call
Disconnecting a Call
Press the [SRC] button or press the [
] / [TI]
button for at least 1 second.
Switching to the Private Mode
Press the [
38] knob.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ANSWER”.
SRC
4
MENU VOL
¢
38
/ TI
SEARCH MODE
DISP