Kenwood CAW-KIMUN1 - Handbuch

4
AVAILABLE OSD IMAGES
RE-INSTALLATION
Before you start the re- installation please take care of the following:
IF YOU NEED TO INSTALL THE SAME IN A NEW CAR (EVEN IF IN A SAME GROUP MODEL)
IT IS NECESSARY TO RESET THE MODULE
RESET:
1. WITH THE UNIT POWERED ON, PRESS THE “CAW-KIMUN1” BUTTON UNTILL THE
LED SWITCHES OFF
2. WHEN THE LED SWITCHES OFF, RELEASE THE BUTTON. THE RESET IS DONE
Parking Distance Control Climatronic Control Information
Note:
In case of no OEM Parking sensors, the OSD information will NOT be displayed
In case of “Climatic Control” (manual A/C) the OSD information will NOT be displayed
Depending on vehicle specifications the OPS (Optical Parking System) needs to be activated
The availability of OSD images depends on the vehicle attributes
KIM
LED
BUTTON
ATTENTION! If the vehicle is equipped with:
a) MFD display which is not showing the Body computer or
b) equipped with a MFD PLUS without Steering wheel controls.
it’s necessary to de-activate the MFD functions on the KIM interface. To do so please follow
below steps:
1) Disconnect the KIM interface from the power, then set DIP switch 3 to “ON”
2) Connect the KIM interface with power.
3) The LED will flash: 1x orange, followed by red flashes
4) Press 6 times on the button in the KIM interface and verify the LED flashes:
7x orange and 1x red.
5) Push for long time the button in the KIM interface until the LED switches OFF.
6) Now release the button and verify that the LED flashes 7x orange and 2x red.
7) Once verified above point 6, disconnect the KIM interface from the power
8) Set DIP switch 3 to “OFF” and re-connect the interface with power.
INSTALLATIONSANLEITUNG
CAW-KIMUN1
CAN BUS Interface mit:
Lenkradfernbedienungsanschluss und
Ausgabe von Fahrzeuginformationen
Das Interface ist kompatibel mit KENWOOD Multimedia-Komponenten ab
Baujahr 2012, die über einen EXT I/F-Anschluss verfügen.
KURZBESCHREIBUNG
Der Adapter CAW-KIMUN1 ist ausschließlich für KENWOOD Multimedia-Komponenten vorge-
sehen und unterstützt nicht nur die Lenkradfernbedienung des Fahrzeugs, er kann zudem be-
stimmte Informationen aus dem Fahrzeugdaten-Bus auslesen und im Display des Kenwood
Multimedia-System darstellen - wie z.B. die Abstandsanzeige der Park Distance Control oder die
Darstellung der aktuellen Klimasteuerung sowie weitere, zukünftig im Fahrzeug integrierte
Rev. 2.0
DE
17