Spektrum SPMAR6335 AS3X_Programmer - Handbuch

EN
1.
Connect the ser
vo plug on the audio
interface cable to the BIND/PROG port on your receiver
.
2.
Power the receiver through any open channel.
3.
Connect the audio plug on the interface cable to the audio jack on your mobile device.
The
volume
MUST
be turned up to full.
4.
Ensure you have secure receiver data port and audio data port connections.
If the receiver is being connected for the fi
rst
time,
the
App will automatically open in Model
Wizard in the Model Setup screen.
Step 1 Step 2
Transmitter Setup •
Set all transmitter settings to default.
Important:
The
Aileron,
Elevator and
Rudder settings in the transmitter must remain at their factor
y default values.
Settings for reverse,
sub trim,
travel
adjustment,
expo and dual rate must be
done in the
App only
.
Installing the Receiver 1.
Install the receiver in one of 8 possible orientations using double sided tape.
2.
The ser
vo ports must be facing the front or
rear of the aircraft.
3.
The receiver must be mounted parallel to the roll,
pitch and yaw axis
(NOT ANGLED).
CLEAR BACK
™
®
AS3X
®
Receiver Quick Start
Programming Guide
Step 3
Binding 1.
Insert the bind plug into in the receiver bind port and power on the receiver
. The LED
should blink to indicate the receiver is in bind mode.
2.
Bind the transmitter to the receiver at low throttle.
Refer to your transmitter’
s manual
for details on how to bind to your specifi
c
transmitter
.
Step 4
1.
T
o install the Spektrum
AS3X
App on your
iOS or
Android mobile device,
visit
www
.SpektrumRC.com/AS3X
or download
from the
Apple
App Store or Google Play
store.
2.
Once installed,
start the
App.
Installing the AS3X Mobile Application*
Step 5
Connecting to the Receiver Plug ser
vo leads into assigned ports
Step 6 Step 7
1.
In the setup
Wizard,
follow and complete
each step.
Help functions are available in
each screen to assist.
2.
When model setup is done,
complete fi
nal
setup of the EXPO,
D/R and Gains for each
fl ight
mode.
Model Setup
Step 8
1.
Test all fl
ight modes are
operating as expected (D/R,
Gains and EXPO).
2.
Test ser
vo direction (ser
vo
direction must be set using the
App and not the
transmitter).
3.
Test gyros are correcting in the proper direction.
Prefl
ight
Checks
Control Direction T
est
Move the controls on the transmitter to make sure the aircraft control surfaces move in the proper direction. AS3X Control Direction T
est
Once you are sure the aircraft responds correctly
, move the aircraft as shown to ensure the
AS3X
system moves the control surfaces in their proper direction.
Transmitter Command
Aircraft Reaction
El ev at or
Up Elev
ator
Command
Ai le ro n
Stick Right
Ru dd er
Stick Left Aircraft
Mo
vement
AS3X Reaction
El ev at or Ai le ro n Ru dd er
Normal Model T
ype
•
P
ort 1:
Throttle
•
P
ort 2
: Aileron
•
P
ort 3
: Elevator
•
P
ort
4
: Rudder
•
P
ort 5:
Gear/ Flap
•
P
ort 6:
Left
Aileron
(if equipped with dual ser
vos)
Delta / Elevon Model T
ype
•
P
ort 1
: Throttle
•
P
ort 2
: Right
Aileron
•
P
ort 3
: Left
Aileron
•
P
ort 4
: Rudder
•
P
ort 5
: Gear
•
P
ort 6
: Aux
1
Typical Ser
vo P
ort Assignments
*
:
P
ort 1
Bind/Prog P
ort 2
P
ort 3
P
ort 4
P
ort 5
P
ort 6
*Minimum system requirements: iOS 6.0,
iPhone 4,
iPod 4th gen and
Android 4.0
*AR636 shown for reference.
Port assignments
will be similar for all
AS3X receivers.
Refer to your
receivers manual for more information.
AR636 shown AR636 shown
Visit
www
.SpektrumRC.com/AS3X
for more
information and to view video’
s on how to
program your new
AS3X receiver
.
*Does not apply to iOS Devices. If your Android device does not recognize the receiver* 1.
Ensure you have secure receiver data
port and audio data port connections.
2.
Disconnect the audio plug from the
device.
3.
Separate the ser
vo plugs in the middle
of the interface cable.
4
.
Flip the device ser
vo plug 180 degrees
and re-connect the ser
vo plugs.
5.
Re-connect the audio plug to the device.
To
get more information,
including information on downloading the Spektrum AS3X Mobile Programming application,
scan this QR code
or visit www
.SpektrumRC.com/AS3X