AEG BP8615001M - Handbuch (Seite 14)

• With Duration
and End
Time you must set the
heating function and the tem-
perature first. Then you can set
the clock function. The appli-
ance deactivates automatically.
• You can use Duration
and
End Time at the same
time if you want to automati-
cally activate and deactivate
the appliance at a given time
later.
• When you use the Core tem-
perature sensor (if applicable),
the Duration
and End
Time functions do not op-
erate.
7.2 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate
the function in the Basic Set-
tings menu.
• Conditions for the function:
– The set temperature is more
than 80 °C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function operates for
30 minutes.
The Heat + Hold function stays on if you
change the heating functions.
7.3 Extra Time
The Extra Time function makes the heat-
ing function continue after the Duration
ends.
• Applicable for all heating functions
with Duration or Weight Automatic.
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1. When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2. The display shows the message for
Extra Time for five minutes.
3. Press to activate (or to can-
cel).
4. Set the length of the Extra Time .
Press OK to confirm.
8. AUTOMATIC PROGRAMMES
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you can-
not change them.
Activating the function:
1. Activate the appliance.
2. Select the Assisted Cooking menu.
Press OK to confirm.
3. Select the category and dish. Press
OK to confirm.
4. Select Recipe Automatic . Press OK
to confirm.
When you use the Manual func-
tion, the appliance uses automat-
ic settings. You can change them
as with other functions.
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
14 www.aeg.com