ADAM Audio Pencil MK3 Active Version - Handbuch (Seite 6)

6
2.1 Important Information for set up
After having unpacked your loudspeaker, please allow the system to acclimate to
the temperature of the room for approximately an hour.
We recommend using high quality cables to guarantee optimal performance.
It is important to ensure the speakers sit firmly on a solid surface!
We recommend that you retain the original packaging, as it is the best way to
guarantee safe transportation should the need to do so arise.
Please note that the loudspeakers will take some break-in time to achieve
optimum sonic performance.
2.2 How to use the spikes
If you choose to use the spikes to optimize floor decoupling, please proceed as
follows:
a) Put the loudspeaker carefully on the side or top. To avoid scratches, please put it
on a soft cloth and take care not to damage the cabinet or the drive units during
handling.
b) Take four of the spikes and screw them into the designated holes at the base of the
plinth.
c) Make sure that all four spikes are screwed fully into the threaded inserts and put
the speaker to the upright. If the cabinet rocks, unscrew the two spikes that do not
touch the floor until the cabinet rests firmly without rocking. Adjust the spikes with
the provided 6mm hex key.
Please ensure the spikes are either fully screwed in or firmly fixed by the nuts!
2. Quick Start