ADAM Audio Gamma Active Version - Handbuch (Seite 7)

7 Tensor Gamma (Active Version) Manual / english
3.1 Important Information for setup
The Gamma has a total weight of approximately 54 kg. Therefore we strongly
recommend to unpack and set up the loudspeakers not by oneself. ADAM Audio
is not liable for any damage of the loudspeakers or other items or any injuries
which might occur due to improper setting up. We ask you to be very careful.
We recommend to wear the white gloves. They provide a white PVC dotted cove-
ring on the inside allowing extra grip.
Each unit is wrapped in a special sheath that is open at the bottom. In any case, we
would recommend keeping the sheath, as it will prove useful when the loudspeaker
is being transported. Moreover, it is ideal for dust protection if the loudspeakers
will not being used for some time. Furthermore, we recommend not to damage
the package and to retain it. The original packaging is the best guarantee for safe
transportation (see 9.).
3.2 Spikes and Plates
The speakers are intended to be floor mounted only. They must stand firmly on
the floor.
If you choose to use the spikes to optimize floor decoupling, please proceed as
follows:
Take one speaker out of the box and put it carefully on solid ground (to avoid
scratches, use a soft cloth).
Take four of the spikes and screw them into the designated holes at the base. On a
level floor make sure that all four spikes are screwed in to the same depth. Please
make sure the spikes are either fully screwed in or firmly fixed by the nuts.
If you wish to use the plates, put them on the floor according to the desired
position of the loudspeaker. Using the plates is strongly recommended whenever
the spikes might damage the surface of the floor.
3. Unpacking / Setup