ADAM Audio Alpha Semi-active Version - Handbuch (Seite 12)

12
6.1 Standby switch / Overload display
The TENSOR Alpha features a standby button on the front panel. Please note that
due to the system, the OL (overload) display blinks when the loudspeaker is
being switched on. This does not indicate an overload.
If the OL display blinks during normal operation, this indicates an over-
load danger. To avert an overload and protect the loudspeaker, the
built-in security circuit will limit the maximum level of the amplifier.
6.2 Control panel
On the rear side you will find
controls that allow detailed fine-
tuning of your loudspeakers to
your particular room acoustics and
personal listening preferences.
The following tips are intended to
assist you at using the controls in
the best manner.
Please note that using the controls may have a great impact on the overall sound
characteristics of your loudspeakers. We recommend using the controls with ut-
most care and only after several audio tests with familiar recordings.
6. Speaker Adjustment