ADAM Audio ARTist 6 - Handbuch (Seite 8)

8
3.4 LED
On the lower side of the tweeter you will find an LED. It indicates Power On and, in
case of an overload, the function of the protective circuit.
The LED starts to glow green during normal operation (the power switch is located
on the rear side of the speaker)
In case of an overload, the LED will flash green. The protective circuit will safe your
speaker from damage.
Please note:
The speakers will go in stand-by mode when they don‘t receive
a signal for about 15 minutes. In this case, the LED will turn red.
While operation, the LED glows green.
3. Connecting the Speakers