ADAM Audio ARTist 3 Wall Mount Bracket - Handbuch (Seite 7)

7 Wall Mount Bracket Manual / english
3.3 Attaching the loudspeaker to the wall mount
Please consider having a helper during the installation process. This can avoid
injuries and speaker damage.
a) Bring the arm that is going to hold the speaker in
a horizontal position by screwing down the socket
screw on top of the side arm using the included
Allen wrench.
b) Turn the speaker holding plate with attached
T-plate aside so that you will be able to mount the
speaker easily.
c) Place the adapter plate between the T-Plate and the two
screw holes on the rear of the speaker before you screw
the monitor onto the wall mount (using the two longer
socket screws). A second person should raise the speaker
while you are doing this.
d) Turn the monitor into the desired position. Adjust the angle of the side arm again
if necessary. Tighten all screws finally.
4. Maintenance
Please be careful during maintenance work and watch out for possible injuries.
Inspect bolted assemblies regularly to ensure they remain tight.
Use a damp cloth on a mild, nonabrasive detergent to clean the wall mount bracket.
3. Installation