Eppendorf Thermoblocks - Handbuch (Seite 5)

5
Instructions for use
3 Intended use
The exchangeable thermoblocks are intended exclusively for indoor use and to hold
tubes and plates during sample preparation.
The exchangeable thermoblocks must only be operated by appropriately qualified and
instructed personnel. Carefully read the operating manual before working with the
exchangeable thermoblocks and familiarize yourself with their use.
4 Installation and operation
4.1 Mounting exchangeable thermoblocks
4.1.1 Exchangeable thermoblocks for micro test tubes
Valid for:
•
0.5 ml micro test tubes
•
1.5 ml micro test tubes
•
2.0 ml micro test tubes
•
5.0 ml micro test tubes
•
11-11.9 mm Diameter of tubes
•
15 ml Falcon tubes
•
50 ml Falcon tubes
WARNING!
Warning! Injury or property damage from improperly attached
exchangeable thermoblocks.
If the exchangeable thermoblocks are not attached properly, they can become
detached from the device or break.
 Tighten the screws of the exchangeable thermoblocks fingertight.
WARNING!
Warning! Contamination due to opening tube cover.
Covers of micro test tubes can snap open involuntarily in the following cases,
causing sample material to escape:
•
high vapor pressure of the content
•
improperly sealed cover
•
damaged sealing lip
 Always check that micro test tubes have been sealed tightly before use.