Festo SMB-8E Монтаж - Handbuch (Seite 2)

Assembly instructions (original: de)
8005552
1301NH
†‡
Mounting kit
SMB-8E
Festo AG & Co. KG
P.O. Box
D-73726 Esslingen
+49 711 347-0
www.festo.com
1. Parts list
18310d_1
1 Mounting kit (1x)
SMB-8E
Not included in scope of
delivery:
18310d_2
2 Proximity sensor (1x)
e. g. SMPO-1-H-B,
SMPO-8E, SMTO-8E
The mounting kit 1 is intended for mounting a proximity sensor 2.
2. Mounting
1831
0d_3
 Secure the proximity sen-
sor 2 to the left or right-
hand side of the mounting
kit 1.
 Tighten the screw (A)
slightly.
 Place the mounting kit 1
with the proximity sensor 2
in the groove.
 Position the proximity sen-
sor 2 until it switches.
 Press and hold the mount-
ing kit 1 in place so it does
not twist when mounted.
 Tighten the threaded pin (B)
(ß 2.5).
Comply with the permissible
tightening torque.
 Press and hold the prox-
imity sensor 2 in place so it
lies flat when mounted.
 Tighten the screw (A)
(ß 2.5).
Comply with the permissible
tightening torque.
18310d_4
18310d_5
1831
0d_6
1
2
2
1
2 1
A
1.5 Nm
_ 0.5 Nm
1
0.75 Nm
_ 0.25 Nm
B
2
1
A