Festo SL-DSM-B Монтаж - Handbuch (Seite 2)

Assembly instructions (en)
708 009 / 2007-05NH
†‡
Sensor retainer
SL-DSM-B Festo AG & Co. KG
Postfach
73726 Esslingen
++49/(0)711/347-0
www.festo.com
1. Parts list
10805d_1
10805d_2
1 Sensor retainer (2x)
SL-DSM-B
2 Countersunk screw (2x)
M2x8
Not included in scope of
delivery:
3 Proximity sensor (2x)
SME/SMT-10F-…
Note
The LEDs on the proximity sensor 3 may only be partly visible, even if
positioned correctly.
Caution
The cables may break if overstressed.
•
Fasten the cables of the proximity sensor 3.
2. Assembly
10
80
5d
_3
• Press the proximity sen-
sors 3 into the groove in the
sensor retainer 1.
10
80
5d
_4
• Place the sensor retainer 1
with the proximity sensor 3
on the cushioning support so
that the proximity sensor 3
lies in the guide ring (A).
• Tighten the screws 2 only
slightly so that the proximity
sensor 3 can still be shifted.
10
80
5d
_5
The magnet (B) which serves for
position recognition is situated
in the stop lever.
•
Connect the proximity
sensor 3.
• Position the proximity
sensor 3 in the guide ring
so that it switches in the end
position.
In order to clamp the proximity
sensor 3:
•
Tighten the screw 2.
3
1
2
3
1
1
3
A
2
B
2
0.2 Nm
3