HYDAC HMG 500 - Handbuch (Seite 22)

22
The time period always begins when
the min/max values are reset.
Resetting the values is triggered by
the following:
•
Switching on the unit
•
Pressing the „Reset“ button
•
Connecting or disconnecting
an HSI sensor
To get to the min or max value display,
press the min/max key:
•
press 1 x: Minimum value
•
press 2 x: Maximum value
•
press 3 x: Back to the actual
measured value
display
Please note that in the measured
value display, only the minimum or
only the maximum value for both
channels A and B are shown together.
By pressing the Reset button, you
reset the min/max values.
The HMG 500 automatically
recognises the unit of measurement of
the HSI sensors connected. If you
want to display the measured value in
another unit of measurement, you can
set the unit to do this and the HMG
500 converts the value automatically
to the new measuring unit.