Lenze EL 1xx MPI - Handbuch (Seite 33)

Installation
Electrical installation
LDCDS−EL100MA DE/EN 2.2 33
l
H1inst−MPI_Tab
CAN port
)
Note!
ƒ Only connect terminals of the same signal type.
ƒ For further information with regard to the CAN bus system please refer to
the CAN Communication Manual.
We recommend the use of CAN cables according to ISO 11898−2.
Description Connection type Cable type
6
1 CAN bus connection
Pin 1: Not assigned
Pin 2: CAN−LOW (LO)
Pin 3: CAN−GND (CG)
Pin 4 ... 6: Not assigned
Pin 7: CAN−HIGH (HI)
Pin 8 ... 9: Not assigned
9−pole Sub−D plug
CAN cable acc. to
ISO 11898−2 with
9−pole Sub−D socket
IPC001
MPI port
)
Note!
ƒ For more information on the MPI port, please see the Siemens S7 System
Manual.
Please follow the specifications of the PROFIBUS user organisation (PNO) for signal cables.
Description Connection type Cable type
6
1 MPI connection
Pin 1 ... 2: Not assigned
Pin 3: RxD/TxD−P (B)
Pin 4: RTS
Pin 5: M5V
Pin 6: P5V
Pin 7: Not assigned
Pin 8: RxD/TxD−N (A)
Pin 9: Not assigned
9−pole Sub−D socket
According to
specification of the
Siemens company
IPC001