SPEEDLINK SL-8900-GY-01 XILU Portable Speaker - Handbuch (Seite 2)

1. Charge the speaker by connecting
the charging cable to a USB power source
(500mA). The charging process takes
around 2-3 hours; the LED will light up red
during the process.
2. Activate the speaker by setting the switch
to ON; the LED turns blue.
3. Using the audio cable, connect the speaker to
an audio source (3.5mm). Adjust the volume
level directly on the audio source.
4. As soon as you notice a drop in power,
recharge the speaker.
EN
Intended use
This product is only intended as a speaker for connecting
to a compatible mobile phone / MP3 player. Jöllenbeck
GmbH accepts no liability whatsoever for any injuries or
damages caused due to careless, improper or incorrect
use of the product or use of the product for purposes not
recommended by the manufacturer.
Battery safety
This product is fitted with a Li-ion battery. Do not damage,
open or dismantle the battery and do not use it in
damp and/or corrosive conditions. Only use compatible
chargers. Do not expose the product to temperatures
exceeding 60°C (140°F). Products labelled with a
crossed-out bin symbol must not be disposed of together
with household waste. Used batteries and rechargeables
can contain harmful substances which may cause
environmental damage or harm your health if not stored
or disposed of correctly. As the end user, you are legally
obliged to dispose of electrical equipment at the end
of its useful life at an official collection point; this also
ensures that the integral rechargeable battery is disposed
of correctly.
Avoiding hearing damage
PLEASE NOTE: Listening to audio for extended periods
at loud volume levels may cause permanent hearing
damage, so check the volume level that has been set on
the volume control each time before using the product,
and avoid listening to audio at a high volume level.
Conformity notice
Operation of the device (the devices) may be affected
by strong static, electrical or high-frequency fields (radio
installations, mobile telephones, microwaves, electrostatic
discharges). If this occurs, try increasing the distance
from the devices causing the interference.
Technical support
Having technical problems with this product? Get in
touch with our Support team – the quickest way is via our
website: www.speedlink.com.