Installation instructions, Step 1: step 2: step 4: step 3, Step 5 – Thermalright TRUE Spirit 120M Benutzerhandbuch
Step 1 : Backplate Installation
Choose the platform (775/1155/1156/1366)you are in use. Make four M3L10 Screws go through the
Metal Back Plate from bottom towards top.And then place the Metal Back Plate on the table.
Put the four Washers (for Intel) around the Screw Cylinders.
Step 2 : backplate cap
Note: When installing on a 775 platform, please
first insert the Back Plate Cap into the opening on
the Back plate. Make sure you have the Cap facing
downwards. (Only for 775).
Step 3 : Place the motherboard on top of the Back
Plate. See the four Screw Cylinders go through
the four holes around the processor socket.Cap
the four Screw Cylinders with the four Screw Nuts.
Make sure the side with a washer is facing the
Step 4 : Place the Anchoring Mount on the Screw
Nuts. Use the four M3L6 Screws to fix
the Anchoring Mount on to the Screw Nuts.
Step 5 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly.