Metrohm Metrodata 757 PC - Handbuch (Seite 3)

8.757.8037
METROHM Ltd. CH-9101 Herisau (Switzerland)
Metrodata 757 PC Software 2.0
Hardware requirements for the PC
Computer
Pentium II with 233 MHz or higher
Operating system Windows™ 98 or Windows™ 2000 for operation with add-on
board;
Windows™
2000 for operation with VA Computrace Inter-
face (USB)
Free space on hard disk 10 MB for program files
100 MB recommended for data files
Working memory RAM 64 MB for Windows™ 98
128 MB for Windows™ 2000
Graphics resolution 1024×768 or more
Interface 1 free ISA slot for add-on board or
1 free USB connection for VA Computrace Interface
Printer Any printer supported by operating system
Note: Set the screen saver to "None" and deactivate any energy saving features.
Additionally, do not use several other programs together with VA Computrace.
New installation of Software and VA Computrace Interface
The instruments VA Computrace 2.757.0110 (with MME) and 2.757.0120 (without
MME) are connected to the PC via VA Computrace Interface (USB). For operation of the
757 VA Computrace the PC program «Metrodata 757 PC Software 2.0» stored on the
6.6032.100 CD is needed. This program is installed as follows:
1. Switch on PC and start operating system (Windows™ 2000) without connection
of the VA Computrace Interface via USB cable.
2. Insert installation CD into CD drive.
3. If the autorun option for the CD drive is disabled, select
<Start>
and
Run
. Browse
for the
Setup.exe
file on the installation CD and click on
<OK>
.
4. Click on "
757
" and follow the instructions given in the setup program. Select the
VA Computrace Interface (USB)
option for the interface type. The software package
will be installed in the desired directory (the default directory is
Pro-
grams/Metrohm/757 VA Computrace
).
5. Restart the PC.
6. Connect VA Computrace Interface to the 757 VA Computrace using the
6.2135.010 cable and switch on 757 VA Computrace Stand.
7. Connect VA Computrace Interface to the 6.2158.000 Mains Adapter connected
to the mains.