SCHOEPS ST 20-3/8 - Handbuch (Seite 3)

Flanged Cylinder with Internal Suspension
AF 1, Threaded Adapter ST20-3/8
This convenient elastic suspension device
accepts any microphone or accessory with a
20 mm diameter. A clamping arrangement
holds the item in place (Fig. 2b).
For use with our miniature accessories, an
adapter (ST20-3/8, Fig. 3a and 4) is available
with 20 mm outer diameter and 3/8" threading.
A pair of notches lets the microphone cable pass
on either side of the adapter. The cable of an
S 250 L5Ug or S 420 L5Ug gooseneck (for a
CCM-L C
OMPACT
M
ICROPHONE
, see Fig. 5) can
even pass through the center hole of the
ST 20-3/8 adapter itself, making it completely
invisible above the flange – though to arrange
this would require unsoldering and resoldering
one of the cable connectors.
The adapter ST20-3/8 must be ordered
separately.
Mechanical noise attenuation (average):
20 dB (70 Hz - 1 kHz)
SCHOEPS GmbH · Spitalstr. 20 · D-76227 Karlsruhe (Durlach) · Tel: +49 721 943 20-0 · Fax: +49 721 943 2050
www.schoeps.de · [email protected]
AF 1
3
English
Fig. 2a Fig. 3a
Fig. 1
Fig. 2b Fig. 3b
ST20-3/8
STR-TC
notch
for cable
clamp
SGC
RLG 350 Ug
CCM -- Lg
ST 20-3/8
Fig. 4
center
hole
notches
Fig. 5: S 420 L5Ug und S 250 L5Ug