Scarlett SC-1099 Benutzerhandbuch

Seite 5

Advertising

www.scarlett-europe.com

SC-1099

INSTALLATION

· Make sure that all the packing materials are removed from the unit.
· Check the oven for any damage in transit:

Misaligned or bent door and sealing;
Housing and door window;
Inside

surfaces.

· If any damage occurs while using, switch off and unplug the oven and contact qualified service personnel.

· Place the microwave oven on a flat, stable surface, able to hold its weight with a food to be cooked in the oven.
· Do not place the oven where heat, moisture or high humidity are generated, or near flammable materials.

· Do not place anything on the oven. Do not block any openings on the appliance.
· For correct operation, the oven must have sufficient airflow. Allow 20 cm free space above the oven, 10 cm back and 5 cm from both sides.
MICROWAVE COOKING METHODS
· Arrange food carefully. Place thickest areas towards outside of dish.

· Watch cooking time. Cook for the shortest amount of time indicated and add more if needed. Food severely overcooked can smoke or ignite.
· Cover foods while cooking. Cover prevents spattering and helps to cook food evenly.
· Rearrange food such as meatballs halfway through cooking both from the top to the bottom and the center of the dish to the outside.

· Round/oval dishes rather than square/oblong ones are recommended, as food in corners tends to overcook.
OPERATION
TIMER

· This feature lets you set the time space (NOT CLOCK OR COOKING TIME).
· Touch MICRO pad.
· Use number pads to input needed time space.

· Touch POWER pad 6 times and the display will show .
· Touch START pad.

· The oven light and cooling fan will turn on while the time is counting down but there is no microwave present.
COOKING INTERRUPTION

· This feature is useful for checking a food cooking degree.
· Cooking will be stopped while the door is opened. With the closed door and pressed START button treatment will continue.

· While any button is pressed, a beep sounds to acknowledge a setting.
CURRENT TIME SETTING

· The LED display will flash «1:01» when plugged in power supply.
· The oven clock is of 12h size.

· Press CLOCK button.
· Press CANCEL button.

· Using

buttons set current time.

· Press CLOCK button to confirm settings.

· Display will show entered time.
POWER LEWELS

· Press MICRO button.

· Pressing

buttons enter treatment duration.

· Using POWER button set power level (relative to Maximum rate).

· Press START button.
JET DEFROST

· Treatment starts at medium-high power, then automatically reduces to medium-low power and then to low power as the food thaws.
· JET DEFROST indicator light and cooking indicator light will both turns on during the defrosting cycle.

· Press JET DEFROST button.

· Enter defrosting duration with

buttons.

· Press START button.
WEIGHT DEFROST

· Select food category with WEIGHT DEFROST button:

FOOD CATEGORY

MAXIMUM WEIGHT

DISPLAY

Meat

2300g

Poultry

4000g

Seafood

900g

Set food weight using

button (each pressing adds 100 g).

· Press START button.
· During the defrosting, there will be two beeps to remind you to rearrange or turn over the food.

· For foods exceeding these maximum weights, use the JET DEFROST program.
GRILL/COMBI

· Press GRILL button.

· Pressing

buttons enter treatment duration.

· Press START button.

· Press COMBI.1 or COMBI.2 button.

· Pressing

buttons enter treatment duration.

· Press START button.
· COMBI 1 is recommended for fish, potatoes cooking: 30% - microwaves; 70 % - grill.

· COMBI 2 is recommended for Omelette, potatoes and poultry baking: 55 % - microwaves; 45% - grill.
DELAYED COOKING

· Press PRE-SET button.

· Using

buttons set starting time. This function is active only while current time is adjusted.

· Select treatment mode.

· Press START button.
PROGRAM COOKING

· For consecutive defrosting, microwave treatment and grill one have to:

Press CANCEL button.
Select

defrosting mode.

Advertising