Pilz PSEN op Lens Shield-2-050 - Handbuch (Seite 7)

EN
1002402-2EN-01
PSEN op LensShield
Operating instructions
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany 3
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] Original document
Finally, slide the transparent plate into the ready-made guide rail,
below the bracket. When positioned correctly, tighten the screws
and press the notch of the bracket against the plate until all the
mounting brackets are firmly seated.
To replace, loosen the screws , slide out the plate and replace as
required.
Fig. 5 Fig. 6
NOTE: The operating range of the ESPE is reduced by around
10 % of the maximum specified value for each “LENS SHIELD”
pair (one value for the TX unit and one for the RX unit).
Hold down