D.A.S. Audio TRD-5 - Handbuch (Seite 2)

21364 Distance Rod »Ring Lock«
- steel connecting rod for satellite systems
- load up to 35 kg
- technical information: expanding mandrel system ø 35-37 mm, threaded bolt M20, total height: 880 mm, weight: 1.2 kg
SAFETY NOTICES
ASSEMBLY INSTRUCTIONS
1. Subwoofer must have a M20 female thread (for example: K&M-Adapter 24116).
2. Screw the distance rod with theaded bolt in the subwoofer ensuring a tight fit.
2. OBSERVE: a loose thread connection should always be tightened.
3. Adjust the expanding mandrel system ring lock towards OPEN
3. to the smallest diameter.
4. Place the satellite on the upper expanding mandrel system.
5. Now turn the upper ring lock to the left (direction CLOSE)
5. until the splints fit tightly.
USER INFORMATION
Adjust the direction of the speaker
Turn the ring lock to the right (direction OPEN).
Place satellite speaker in the desired position.
Now turn the ring lock left (direction CLOSE).
OBSERVE: Do not loosen the basic rod.
TECHNICAL INFORMATION / SPECIFICATIONS
Material
tube - steel, powder coated, color black
screws -steel, galvanized
ring lock- aluminum
mandrel elements – PA
Load max. 35 kg
Dimensions H: 880 mm, Expanding mandrel system: ø 35-37 x 102 mm
Package H x W x B: 900 x 50 x 50 mm
Weight 1.2 kg
Accessories
(optional) Adapter sleeve 21326: for speaker mounting adapter
with 38 mm diameter (= US-Variant)
Thank you very much for selecting this product. These instructions provide the information on all the important assembly and handling
steps required for assembly. We recommend that you store a copy of these instructions for future use.
INSPECTION, MAINTENANCE, CLEANING
- Maintenance is always to be performed when the system is not under strain.
- Check the functioning of the ring lock regularly.
- For cleaning purposes utilize a slightly damp cloth with a non-abrasive
- cleaning solvent.
ERROR IDENTIFICATION (E) and CORRECTION (C)
E: Adapter sleeve does not fit on the stand:
E: C: Check if the stand tube has the required: ø 35 mm.
E: Speaker teeters on the expanding mandrel system:
E: C: Re-tighten the ring lock (direction CLOSE) until the speaker is stable.
E: C: Speaker mounting adapter may not exceed ø 37 mm.
E: Speaker is difficult to adjust:
E: C: Lift the speaker up a bit during the adjustment.
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21364-000-55 Rev.02 03-80-134-00 12/08
- The load of 35 kg only applies in conjunction with a proper installation of
- subwoofer and satellite speaker, i.e.:
- A. level and sustainable surface
- B. The subwoofer must be heavier than the satellite
- C. Satellite is to be secured against sideways impact.
- Ensure functioning speaker material, in particular the
- mounting adapter must be the correct size and quality.
- Pay attention to the fixed screw connections on the distance rod and connector plate.