Lenze Digitec MP 600-9000 DVI - Handbuch (Seite 41)

39
3.3.3 USB out (downstream)
The computer has two USB 1.1 connections (type A). The USB version depends on the board used.
The connector has the following pin assignment:
Maximum current load per connection: 500mA
3.3.4 DVI connection
The monitor panel has an integrated DVI-D (digital signals) connection. The digital display signals
are automatically adapted to the resolution of the display connected.
The connector has the following pin assignment:
PIN Signal
1 +5V
2 /USB
3 USB
4 GND
PIN Signal
1 TMDS Data 2 -
2 TMDS Data 2 +
3 TMDS Data 2 Shield
4 No connection
5 No connection
6 DDC-CLK: Display Data Channel Clock
7 DDC-DAT: Display Data Channel Data
8 No connection
9 TMDS Data 1 -
10 TMDS Data 1 +
11 TMDS Data 1 Shield
12 No connection
13 No connection
14 +5 V Power (Out)
15 Ground
16 Hot Plug Detect (In)
17 TMDS Data 0 -
18 TMDS Data 0 +
19 TMDS Data 0 Shield
20 No connection
21 No connection
22 TMDS Clock Shield
23 TMDS Clock +
24 TMDS Clock -
25 No connection
26 No connection
27 No connection
28 No connection
29 No connection