3 connections of the monitor panel, 1 supply voltage connection, 2 usb in (upstream) – Lenze Digitec MP 600-9000 DVI Benutzerhandbuch
Seite 40: Connections of the monitor panel, Supply voltage connection, Usb in (upstream), Illustration 6, Connection side of the mp series
38
3.3 Connections of the monitor panel
Illustration 6
Connection side of the MP series
Video input
DVI-D
(screen connection to the computer)
USB input
1x USB-B, upstream
(connection to the computer)
USB output
2x USB-A, downstream
(for the connection of USB devices)
24V DC supply voltage
Phoenix COMBICON, model MSTB 2.5/3-ST-5.08
3.3.1 Supply voltage connection
The computer is connected to 24 V DC via a 3-pole "Phönix-Combicon" connector. The connector
required is contained in the scope of supply of the device.
The connection has the following pin assignment:
The PE input is connected to GND and to the housing.
3.3.2 USB in (upstream)
Via the USB port (type B) the connection to the computer is established.
The connector has the following pin assignment:
PIN
Signal
1 +5V
2
-Data
3 +Data
4
GND