Lenze Digitec MP 600-9000 DVI - Handbuch (Seite 42)

40
3.3.5 DVI/USB extender
Using a DVI/USB extender allows the MP to be connected to the computer over greater distances.
A maximum distance of 5m is possible with standard cables.
The USB/DVI-TX transmission unit is connected to the computer, the receiver unit is located in the
MP device.
For details please see the separate manual.
3.3.6 Earthing screw
The device has to be earthed with a separate earthing cable (min. 2.5 mm 2 ) via the earthing screw.
The cable should be as short as possible.
Required nuts and washers are mounted on the ground bolt of the housing by the factory.
Structure of the screwed connection on the housing:
Illustration 7 Earth terminal
Important!
Observe that the nut at least is tightened
in a hand-tight manner after the connection with the earthing cable.