Operating elements, 2 operating elements – AUDIOLINE Baby Care 8 eco zero Benutzerhandbuch

Seite 17

Advertising
background image

GB

3

Operating Elements

2 Operating Elements

Sender (Baby unit)

1 On/Off key

Press to switch on the unit.
Press and hold down for approx. 2 seconds to switch off the unit.

2 Night light / temperature indicator

On/Off controllable from the parent unit. Different colours indicate a lower and higher temperatu-
re range (blue = below / orange = above).

3 Paging key

- Press briefly to “page“ the parent unit with an audible alert.
- Press and hold to talk via the parent unit’s loudspeaker.
Useful to call for assistance or to locate a missing parent unit.

4 Temperature Sensor
5 Switch „zero emission“
(bottom)
6 Battery compartment (rear)

Compartment for 4 AAA batteries (not provided) for backing up the baby unit during a power
failure.

Zero emission
The baby unit is equipped with a special transmission technology.
When the baby unit stays at stand-by and no noise or baby crying is
detected, it does not transmit any radiation power. When the unit
detects any sound which is higher than the sensitivity level, it starts to
transmit a signal to the parent unit in order to establish digital commu-
nication. This may take up to 8 seconds. The zero emission feature is
controlled by the bottom switch of baby unit (set to “On“ - delivery
state).

With the switch in position „Off“ a continuous low power connection to the parent unit is on. By this
the above described delay for establishing the link will not take place.

1

6

5

4

2

3

Advertising