Clearaudio TQ-I (Tangential) - Handbuch (Seite 19)

clearaudio-TQ-I
User manual / Bedienungsanleitung
Seite/Page 19  clearaudio electronic GmbH 2015
2. Mount the tonearm base
Mount the tonearm base on a clearaudio turntable:
Fix the tonearm base with the three screws and the hex key wrench provided onto the dry and clean
surface of the turntable´s proper part.
Mount the tonearm base on a turntable of other manufacturers:
In order to mount the tonearm base on the turntable chassis you will first havo to place three drills
into the turntable chassis. To find out the right position of these drills please take the measures out of
the scetch (also delivered). For this step use an 3,3mm drill. After you have drilled the three holes, cut
the windings with a proper screw-tap. If the material of the turntable chassis is not suitable to be
fitted with windings please use an 4,5mm drill for the holes. In this case you will need some longer
screws with nuts to fix the tonearm base.
Now you can mount the tonearm base on the clean and dry surface of the turntable chassis.