Dream Property DM500 + - Handbuch (Seite 137)

38
U s e r M a n u a l D r e a m b o x D M 5 0 0 +
english
23.2 2 satellites via Toneburst
Use this type of configuration if you want to receive two satellites from one LNB each. It does
not matter if you use one or two dishes to achieve this. Connect the two coax cables form the
two LNBs to a so-called Toneburst switch and connect the coax cable from the Toneburst
switch to your Dreambox. Please read the section Satellite configuration to learn how to
get into this menu.
Choose the upper drop down menu and press the
OK-Button.
A list of all possible configurations will show up.
Select the “2 satellites via Toneburst” option and
press the OK-Button.
Select your desired satellites as described in the
one single satellite – direct connection section.
Make sure you know which satellite is connected to
which input on the Toneburst switch.
If you do not find any services in the transponder
scan later, exchange the two satellites in this list and
try again.
Choose “save” and press the OK-Button.
The configuration for “2 satellites via Toneburst” is
now done.
The menu “Transponder scan” will show up. See
sections Automatic transponder scan or
Automatic multisat transponder scan for details.