Beurer PM 200+ - Handbuch (Seite 17)

17
INSTALLATION – INITIAL USE
1. Installing the runtastic app
Open one of the following apps according to your
operating system:
- iPhone: App Store
- Android: Market
- BlackBerry: App World
- Windows Phone7: Marketplace
• Download the free version of the runtastic app to
your smartphone.
• At www.runtastic.com/activate, enter the promo-
tion code found on the front of the enclosed card.
• Restart the runtastic app and all PRO features will
be activated automatically. The pulse function
and many other PRO functions are now activated.
2. Putting on the chest strap
• Secure the chest strap to the elastic tension belt.
Adjust the length of the belt so that it is comforta-
ble without being too loose or too tight. Position
the belt around the chest with the logo facing out-
wards and in the correct position immediately on
the breastbone. On men, the chest strap should lie
immediately below the pectoral muscle, on women,
immediately below the bust.
• As optimum contact between the skin and pulse
sensors is not always possible immediately, it may
be some time before the pulse is measured and
displayed. Adjust the position of the transmit-
ter to achieve optimum contact. The formation of
sweat under the chest strap usually helps to ensure
good contact. You can also moisten the contacts
on the inside of the chest strap. To do this, lift the
chest strap away from the skin slightly and careful-
ly moisten both sensors with saliva, water or ECG
gel (available from pharmacies). Contact between
the skin and the chest strap must not be interrupted
when there is significant movement of the ribcage,
such as when taking a deep breath. Chest hair may
interrupt or even prevent contact.