Guntermann & Drunck DVISplitter2 - Handbuch (Seite 17)

Initiation
G&D DVISplitter2 · 4
Initiation
After having installed the DVISplitter2 video extender, the device is ready for operation.
Status displays
The LEDs on the device’s back panel enable to control the operating status of the
DVISplitter2 video extender:
Yellow Clock-LED on A stable video signal has been detected at
the DVI CPU video input.
blinking No (stable) video signal has been detected at
the DVI CPU video input.
fast blinking The DDC learning mode is active.
Green Power-LED
on The DVISplitter2 video extender is supplied
with voltage.
off The power pack is not connected or the
connection to the supply voltage has not
been established.