H3C Technologies H3C WX3000E Series Wireless Switches Benutzerhandbuch
Seite 9

5
United
Kingdom
•
The supply plug must comply with BS1363 (3-pin, 13A) and be fitted with a 13A
fuse that complies with BS1362
•
The mains cord must <HAR> or <BASEC> marked and be of type H03VVF3G1.0
(minimum)
Europe
Europa
•
The supply plug must comply with CEE 7/7 (“SCHUKO”) The mains cord must
<HAR> or <BASEC> marked and be of type H03VVF3G1.0 (minimum)
•
Der Stromversorgungsstecker muss CEE 7/7 (“SCHUKO”) entsprechen.
•
Das Netzkabel muss von <HAR> oder <BASEC> gezeichnet werden und sein Typ
muss von H03VVF3G1.0 (Minimum) sein.
Denmark
•
The supply plug must comply with section 107-2-D1, standard DK2-1a or DK2-5a.
Switzerland
•
The supply plug must comply with SEV/ASE 1011.
中国
•
电源线组件必须通过
CCC 认证。
The appliance coupler (the connector to the unit and not the connector to the wall plug) must have a
configuration for mating with an EN 60320 / IEC 320 appliance inlet.
Die Gerätesteckvorrichtung (der Anschluss an die Anlage, nicht an den Wandstecker) muss zu dem
Gerätestecker von EN 60320 / IEC 320 passende Konfiguration haben.
WARNING: Because the device has several power supplies, disconnect all of them to switch off the
device.
Warnung: Da das Gerät mehrere Energiequellen hat, ist es notwendig stets alle Verbindungen zu
unterbrechen, um den energiefreien Zustand zu erreichen.
警告:因为设备存在多种电源输入,在关闭设备时确保切断所有电源连接。
Caution: Fiber optic ports – optical safety
Achtung: Glasfaseranschlüsse—optische Sicherheit
警告:光纤接口
——光口安全
Never look at the transmit laser while the power is on. Never look directly at the fiber ports and the fiber
cable ends when they are powered on.
Nie blicken die Lasersendung bei Anschalten an. Nie sehen direkt die Faseranschlüsse oder die
Faserkabelende bei Anschalten an.
当光模块工作时,请不要直视光模块和光纤接头。
WARNING: Use of controls or adjustments of the performance or procedures other than those specified
herein may result in hazardous laser emissions.
Warnung: Alle manuelle Bedienungen anders wie hierbei genannte können gefährliche
Laseremissionen verursachen.
警告:不遵守本手册规定而任意改动光模块的功能或性能可能导致激光辐射的危险。