Aquapur Z31136 Lint Remover - Handbuch (Seite 10)

10 GB/IE
Never apply too much pressure. In this way the
lint and pilling are shaven off and are kept in the
lint container.
Note: We recommend that you do not operate
the device for more than about 2 minutes in one
session.
Select between different height settings by turn-
ing the glide piece 7 towards the left or right.
You may select the settings H (high), M (middle)
and L (low).
Cleaning
Never put the device in water for
cleaning.
Always switch off the device before cleaning it,
then open the battery compartment 8 cover.
Remove the batteries 9 from the battery com-
partment to prevent accidentally switching the
device on.
Then pull the protective cover 6 off of the
device.
ATTENTION: When removing lint remains, be
careful not to damage the cutting blade 1 .
The lint container 4 should be emptied regularly!
1. Lint container: Pull off the lint container and
empty it. The lint container
should never be more than
3 / 4 full.