Auriol AUB 2 A1 - Handbuch (Seite 9)

Watch winder AUB 2 A1
English - 7
 The power supply adapter (G) consumes power even in standby mode, thus it must be
removed from the mains socket to be completely disconnected from the mains.
Pay attention to these instructions to avoid a risk of fatal injury or fire! The power supply adapter
(G) also may never be blocked because there is a risk of fire. Never try to open the housing of the
power supply adapter (G). There is a risk of a fatal electric shock.
Cables
Always handle the cables by the connector and do not pull on the cables themselves. Never place
furniture or other heavy objects on the cables and take care that the cables are not kinked,
especially near the plug and connection sockets. Do not connect the cables over hot or sharp
points and edges to prevent damage. Never make knots in any of the cables or tie them together
with other cables. Ensure that all cables are placed so that no one can trip over them and they do
not cause an obstruction.
Maintenance / Cleaning
Servicing is necessary if the watch winder has been damaged or if liquids or objects have
penetrated the housing, if the watch winder has been exposed to rain or moisture or if it does not
work correctly or has been dropped. If you notice any smoke, unusual noises or strange odours,
turn off the watch winder immediately, remove the power supply adapter (G) from the mains socket
and remove the batteries. In such cases, the watch winder should not be used until it has been
inspected by authorised service personnel. Only have the device repaired by qualified personnel.
Never open the housing of the watch winder or the power supply adapter (G). Only use a clean,
dry cloth for cleaning the watch winder and never use any corrosive liquids.
Operating environment
Always place the watch winder on a level, firm surface and do not place any objects on it. The
watch winder is not designed for use in environments with a high temperature or humidity (e.g.
bathrooms), and must be kept free from dust. Operating temperatures and operating air humidity:
5°C to 35°C, max. 85% rel. air humidity.
Ensure that:
 no direct heat sources (e.g. heating) can affect the watch winder;
 no direct sunlight or bright artificial light reaches the watch winder;
 contact with sprayed and dripping water and corrosive liquids is prevented and the device is
never operated near water; in particular it should never be immersed (do not place any objects
filled with liquids such as vases or drinks on or near the device);