Ernesto Garlic Chopper / 3-in-1 Spice Mill - Handbuch (Seite 3)

3
GB
Garlic Cutter
GB
Instructions for use
Dear customer,
(1) Upper part
(2) Locking screw
(3) Transparent perforated plate
(4) Container
(5) Cutting sieve
(6) Lower part
(7) Transverse cutter
(8) Lower ring
(9) Cover
Figure 1:
Congratulations on the purchase of your garlic cutter. It consists of the parts described in the following:
Hold the Garlic Cutter at the lower part, untwist the locking screw counter
clockwise and remove the upper part (see figure 1).


 Put the peeled garlic clove (cut off the hard end of the garlic clove with a
knife beforehand) into the container and slide the upper part again in the
lower part. Place the locking screw on the lower part and turn clockwise
until the end stop.
Now the garlic cutter is closed and ready for use.
By turning the upper part clockwise (hold the lower part with the hand)
the garlic clove is cut into rectangular strips with the cutting sieve. These
are cut in small even cubes by the transverse cutter of the lower ring.
After the plastic pins of the stamp have been pressed completely through
the openings of the cutting sieve, the garlic is used 100 % and the con-
tainer completely empty. The stop pin prevents an over twisting of the
Garlic Cutter.
8
7
6
9
5
4
3
2
1