Elta 7550 - Handbuch (Seite 55)

TROUBLE SHOOTING
Before going through the checklist, check wiring connection. If any of the problems persist after check list has been
made, consult your nearest service dealer.
Problem Cause Solution
No power The car ignition switch is not on If the power supply is properly
connected to the car accessory terminal,
switch the ignition key to “ACC”
The fuse is blown
Presence of disc in the player
Inserting the disc reverse direction
The disc is extremely dirty or
defective
Temperature inside the car is to
high
The colour system is set
incorrectly
The unit is not connected to the
parking break detection switch
The parking break is not engaged
The disc format is not according to
the TV-set used (PAL/NTSC)
No JPEG files are recorded on the
disc
JPEG files are not recorded in a
compliant format
The built-in microcomputer is not
operating properly due to noise
The antenna cable is not
connected
The signals are to weak
Change the disc Record JPEG files using a
compliant application
Press the RESET button. Front panes is not
properly fixed into its place
Insert the antenna cable firmly
Select a station manually
Change the disc
Replace the Fuse
Remove the disc in player then put a
new one
Insert the disc with label facing upwards
Clean the disc or try to play a new one
Cool off or until the ambient temperature return
to normal
Please switch to correct colour system from
menu
Make proper connection according to wire
connection
For safety reasons no television/video images
are displayed while the vehicle is moving.
Engage the parking break will cause images to
be displayed.
Please the television mode of the choice
accommodation
The radio does not
work
The operation keys
do not work
JPEG disc can not
be played back
No colour in picture
No television/video
image appears
Television/video
image appears
black-white
Disc can not be
loaded or ejected
55.