Melinera Z31120A Z31120B - Handbuch (Seite 7)

7 GB/IE
Ensure that the product is installed by suitably experienced
or qualified persons only.
CAUTION! RISK OF OVERHEATING! Do not
operate the light chain 1 inside the packaging.
After use, keep the light chain 1 in the packaging to
prevent unwanted damage.
Do not pull the light chain 1 cable and make sure it is
laid down properly so that no one walks or trips over it.
The product can be used on all surfaces officially
classified as being of “normal flammability“.
Do not attach any other objects to the product.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage available is
the same as the required operating voltage for the
device (230 V ∼).
Before connecting the device to the mains you should
always check the light chain 1 and the mains
adapter 2 for any damage.
Please ensure that all the LED bulb fitting sockets have
a LED bulb in them.
Never use the light chain 1 if you discover that it is
damaged in any way.
This light set‘s external flexible tube is non-replaceable.
Hence if it becomes damaged you must dispose of
the entire light chain
1 .
This article does not contain any parts which can be
serviced by the user. The LED bulbs cannot be replaced.
Only use the light chain 1 with the supplied mains
adapter 2 for the type (Model No. PT-IP-24003); all
warranty claims will otherwise expire.
S
h
!
H
e
st
t