Ultimate Speed 12V CAR ADAPTOR - Handbuch (Seite 10)

12 GB/CY

Place the adhesive pads onto the lower side
of the car adapter.

Remove the adhesive foil from the other side
of the adhesive pad.

Place the car adapter on the place you wish
to have it and gently press it down.
Note: You should only use the product
24 hours after installation. After 24 hours the
adhesive pads have reached their optimum
degree of adhesion. After installation do not
change the position of the adhesive pads.
Otherwise the adhesion of the adhesive pads
may be restricted.
CAUTION! DANGER OF ACCIDENT!
Check that the car adapter is still firmly in
place at regular intervals.
 Using the car adapter

Remove the cigarette lighter from the connector
socket.

Plug the 12-Volt connector plug 1
into the
connector socket of the cigarette lighter.
Note: Turn the 12-Volt connector plug 1 if
18.10.10 13:57