Silvercrest SIKP 2000 B2 - Handbuch (Seite 9)

7 SIKP 2000 B2
GB
IE
CY
Only use cookware that is suitable for the size of the cooking area 1.
The diameter...
–
may not exceed 26 cm, so that the pan does not overhang,
–
and may not be less than 16 cm, so that the energy fi eld can actually
work.
–
The base of the pan may not be uneven, rather, it must sit fl at.
Only then can the induction cooker function perfectly.
Setup
So as not to overheat, the appliance requires unrestricted ventilation. Therefore,
position the appliance such that ...
–
there is an all-round free space of minimum 10 cm, e.g. to the nearest
wall,
–
a free space directly above of minimum 60 cm, e.g. to a suspended wall
cabinet.
For cooling, the appliance draws in air through the openings on the underside.
■ Therefore, place it only on smooth surfaces, not on textiles or fl uff y surfaces,
such as tablecloths.
■ Do not place it adjacent to curtains, drapes or other textiles which, due to
the airfl ow, could press themselves against the appliance.
Utilisation
When you have unpacked and positioned the appliance as described above, it
is now ready for use.
Placing the cookware
■ Place the cookware in the middle of the cooking area 1. This may ...
–
not project beyond the edge of the cooking area 1 ...
–
not weigh more than 10 kg (together with the content).
Switching on
■ When cookware with content is standing on the hob 1:
–
Insert the plug 2 into a mains power socket. A signal tone sounds and
“- L -“ appears on the display 8. The appliance is now ready for use.
–
Press the button On/Off 5. The control lamp POWER 4 lights up,
the control lamp Cooking w blinks, the symbol fl ashes below the
display 8 and “L5“ appears in the display 8. A signal tone sounds.
The appliance is now ready for use.
IB_74434_SIKP2000B2_LB6.indb Abs2:7 IB_74434_SIKP2000B2_LB6.indb Abs2:7 10.05.12 14:20 10.05.12 14:20