Silvercrest SWK 3000 EDS B2 - Handbuch (Seite 22)

19 SWK 3000 EDS B2
GB
Boiling water
RISK - ELECTRICAL SHOCK!
► Never place the electrical base  close to water – this would be a
potentially fatal risk!
WARNING - RISK OF INJURY!
► For safety reasons you should not open the lid when the water is boiling or
extremely hot. There is a risk of scalding.
WARNING - RISK OF INJURY!
► Always use freshly drawn water. Do not consume any water that has
already stood in the kettle for longer than one hour. Do not reboil water
that has cooled down. Always pour old water away. Microbes could have
formed in it!
NOTE
► Always ensure that the ON/OFF switch  is turned to “ “ when the mains
plug is unplugged and the device is standing on the base .
If not, the device could heat up unintendedly as soon as the mains plug is
plugged in again.
1) Lift the kettle off of the base when filling it!
2) Press the unlocking button  and open the lid.
NOTE
► When filling it, hold the kettle upright. This is the only way to read the
markings on the scale correctly.
3) Fill the kettle...
– to at least the MIN mark, so that the appliance does not overheat,
– to maximum the MAX mark, so that boiling water cannot spill out.
4) First close the lid, then place the kettle on the base , so that it sits securely
on the base .
5) Now insert the plug into the mains power socket.
6) Press the ON/OFF switch  downwards so that it engages.
7) The control lamps integrated into the scale as well as the control lamp in the
ON/OFF switch  indicate that the appliance is now heating up.
8) As soon as the water is boiling, the appliance will switch itself off, the
ON/OFF switch  clicks upwards and the light goes out.