Cleaning, Attention, Modifying the aroma – Silvercrest SKAS 1000 B1 Benutzerhandbuch

Seite 7: Switching on and off, Risk of electrocution

Advertising
background image

- 5 -

Note:

Place approx. one heaped measuring spoon of
ground coffee in per cup. Should the coffee be
preferred a little weaker, you can reduce the
amount of coffee per cup.

4. Close the filter holder 7. Ensure that the coffee

throughflow 8 lies in the middle and above the
glass jug.

Fill the appliance with water

Note:

Use only freshly drawn mains water to brew coffee!

1. Open the water tank cover 3.
2. Fill the glass jug with water.

Attention!

• Never fill the water tank with a volume greater

than 12 cups of water. Never fill the water tank
with a volume of less than 3 cups of water. If
you do, the appliance could be damaged. Use
the marker on the water volume indicator 4.

3. Pour the amount of water required for the volu-

me of ground coffee into the water tank. Use
the marker on the water volume indicator 4.
Ensure that the water is poured in slowly, so
that it can run between the two water tanks ope-
nings.

4. Close the water tank cover 3.

Modifying the aroma

• Select the desired coffee strength on the aroma

selector switch 2. The setting

gives strong

coffee, the setting

gives mild coffee.

Switching On and Off

• When you are ready to switch the coffee machine

on, place the On/Off switch 5 at the position
“On” (I). The integrated control lamp glows.

• When you are ready to switch the coffee machine

off, place the On/Off switch 5 at the position
“Off” (O). The integrated control lamp goes out.

• Remove the plug from the mains socket if you

are intending to discontinue using the coffee ma-
chine.

Note:

If you do not switch the coffee machine off with the
On/Off switch 5 after the brewing process, the
coffee is kept warm on the hot plate until you do
switch the coffee machine off.
We recommend however to drink the coffee freshly
brewed.

Cleaning

In order to obtain an optimal taste result from every
brewing process you should clean the coffee machine
after every use.

• Remove the plug from the mains socket.

Risk of electrocution!

Before you clean the Coffee Maker you MUST remove
the plug from the power socket. Under no circumstances
may the appliance be immersed in water or held
under running water during cleaning.

IB_68663_SKAS1000B1_LB3 29.09.2011 10:05 Uhr Seite 5

Advertising