Troubleshooting, Appendix, Disposal of the appliance – Silvercrest SEF 2300 A1 Benutzerhandbuch

Seite 61

Advertising
background image

58

SEF 2300 A1

GB

Troubleshooting

PROBLEM

POSSIBLE CAUSE

POSSIBLE

SOLUTIONS

The appliance is not
working.

or

The control lamp integrated
into the on/off switch 7
does not light up.

The appliance is not connected
with a mains power socket.

Connect the appliance to
a mains power socket.

The appliance is damaged.

Contact Customer Services.

The on/off switch 7 has not
been activated.

Press the on/off switch 7.

The heat protection function
has been activated.

1. Remove the power plug

and allow the appliance
to cool down.

2. Press the reset button on

the control and heating
element 0.

The appliance has switched
itself off during use and
cannot be switched back
on.

The heat protection function
has been activated.

1. Remove the power plug

and allow the appliance
to cool down.

2. Press the reset button on

the control and heating
element 0.

The green control lamp 8
does not light up.

The selected temperature for
the cooking oil/fat has not
been reached.

Wait a few minutes until the
required temperature has
been reached.

If the malfunction cannot be corrected with the above suggestions, or if you have determined
that the malfunction may have other causes, please contact our Customer Service.

Appendix

Disposal of the appliance

Never dispose of the appliance in the normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please observe the currently applicable regulations. Please contact
your waste disposal centre if you are in any doubt.

IB_86360_SEF2300A1_DE_AT_NL.indb 58

IB_86360_SEF2300A1_DE_AT_NL.indb 58

07.11.13 15:20

07.11.13 15:20

DIN A5 148 mm x 210 mm

Advertising