Enterasys Networks VH-8TX1UM - Handbuch (Seite 24)

10 Product Overview VH-8TX1UM/VH-8TX1MF
Factory Defaults
Table 1-3 lists the default settings for switch configuration parameters.
Each parameter can be changed via the console menus or Telnet.
Table 1-3. Factory Default Settings
Parameter Default Value
Multicast Filtering
GMRP Disabled
IGMP Multicast Filtering Disabled
Port Configuration
Flow Control Disabled
Speed and Duplex Auto
Admin Enabled
Broadcast Storm Control Enabled - 500 pps
Port Priority
Default Ingress User Priority 0
Spanning Tree Algorithm
Active Aging Time 100
Bridge Priority 32768
Forward Delay 15
Hello Time 2
Max Age 20
Path Cost 19 - 100 Mbps ports
100 - 10 Mbps ports
Port Priority 128
Spanning Tree Protocol Enabled
System Configuration
Management VLAN All
BootP Enable Disabled
Password <none>
Screen Timeout 10 min
Send Authentication Fail Traps Enabled
SNMP Community Name public, private
Terminal Baud Rate Auto
User Names admin, guest