Gardena C 1030 plus Art. 1862 - Handbuch (Seite 4)

4
GB
You can change the display level at any time, even during pro-
gramming. All the programme data which have been confirmed
up to that point with the OK key are stored.
Display Description
5 Weekdays Current weekday or programmed
(Mo), (Tu), ... watering days.
6 Time Flashes when in input mode for the current
data (hours, minutes, day of the week).
7 am / pm Display for 12 hour clock (e. g. in USA,
Canada).
8 Start Flashes when in input mode for watering
start time.
9 Run Time Watering duration (flashes when in input
mode).
0 8h, 12h, 24h, Watering cycle (with drop symbol
2nd, 3rd, 7th activated). Every 8 / 12 / 24 hours;
every 2nd / 3rd / 7th day.
A Prog ON / OFF Watering programme on ( ON ) / off ( OFF ).
B Automatic Watering is controlled automatically via
mode sensor the sensor.
C Sensor ON / OFF Sensor ON (watering) /
Sensor OFF (watering is not carried out).
D Battery Indicates 5 battery levels :
3 bars :
Battery fully charged
2 bars : Battery half full
1 bar : Battery low
1 bar flashing : Battery almost flat
0 bar :
Battery flat
If no bars are displayed, the valve is no longer opened. A valve
opened by the programme will also close again if the battery
is flat. The battery display is reset when the battery is changed.
D
A
7
5
9 C B
8 6
0
2 Bars 1 Bar 1 Bar flashing 0 Bar
Battery half full Battery low Battery almost flat Battery flat
Valve opens. Valve opens. Valve still opens. Valve does not open.
The Water Computer The Water Computer The Water Computer The Water Computer
is guaranteed to will continue to work stops working soon. stops working.
work for a minimum for no more than
of 4 more weeks. 4 weeks.
It is advisable to The battery must be The battery must be
change the battery. changed soon. changed.
v Replace battery (see 4. Putting Your Water Computer into
Operation “Inserting battery” ).
Display