Gardena Indoor Fountain Pump RP 240 - Handbuch (Seite 5)

18
GB
The temperature of the liquid used must not
be below 4 °C or above 35 °C.
Sand and other abrasive substances in the
liquid cause increased wear and reduce the
output of the pump.
Please observe the local noise prevention
regulations.
3. Initial Operation
1. RP 600 : Insert the fountain socket 1 and nozzle tube 2 .
2. Install the pump at ground level so that the filter housing
is standing in water to at least half its height (with pumps
RP 240 / RP 300 / RP 420 make sure that the sides of the
foam filter under the pump are not blocked).
3. Plug mains plug into an AC power socket.
Warning : Pump will start immediately.
4. Use the flow control 3 to set the desired water flow for the
fountain pump.
Starting up the pump :
1
2
3
RP 240
RP 300
RP 420
RP 600