Metz 20 TK 51 - Handbuch (Seite 43)

- 41 -
By either ways the TV will switch on and the
led becomes green.
To switch the TV off
• Press the “ ” button on the remote control
or at the top of the TV, so the TV will switch
to stand-by mode and the led will turn to red
from green
or,
Unplug the power connection of the TV.
Operating the TV
You can operate your TV both using the
remote control handset and onset buttons.
A.P.S. (Automatic Programming
System)
"All Prestored Programmes Will Be
Erased" message will be displayed when
you turn on your TV for the first time. APS,
searches and sorts all channels and stores
them automatically on your TV, according to
the transmission of programme systems in
your area.
To cancel APS before starting, press “TV”
button. First of all choose the “Country”.
This, will effect the sort process in APS. By
pressing the “ ” or “ ” button, come to the
"Language" item and select the language in
which the menus of the TV will appear. As
soon as you change the language, the
menu items will be displayed in the selected
language. To select “Continue” use
“ ” or “ ” button and press “ ” or “ ” but-
ton.
Xh vt
8‚ˆ‡ ’
Ghtˆhtr
8‚‡vˆr
ГГГГГГ8hpry
6yyÃQ r†‡‚ rqÃQ ‚t h€€r†
XvyyÃ7rÃ@ h†rq
6QTÃD†ÃSˆvt
Qyrh†rÃXhv‡
After APS is finalized, a programme list will
apper on the screen. In the programme list
you will see the programme numbers and
names assigned to the programmes.
If you press the “TV” button at any time while
the A.P.S. is running, the A.P.S. will be
ended. Then, the program list on the screen
will show channels captured until this time.
If you do not accept the locations and / or the
programme names of programmes, you
can change them in Programme menu.
Operating with the buttons on the
TV set
Volume setting and programme selection
can be made by using the buttons at the
control panel on the top of the TV.
Volume Setting
• Press “- VOLUME” button to decrease vol-
ume or “VOLUME +” button to increase vol-
ume, so a volume level scale (slider) will be
displayed at the middle of the bottom on the
screen.
Programme Selecting
• Press “P/Ch +” button to select the next pro-
gramme or “- P/Ch” button to select the pre-
vious programme.
Entering Main Menu
• Press "M" button to enter Main menu. In the
M a i n m e n u s e l e c t s u b m e n u u s i n g
“- P/Ch” or “P/Ch +” button and enter the sub-
menu using “- VOLUME” or “VOLUME +” but-
ton. To learn the usage of the menus, refer to
the Menu System section.
Operating with Remote Control
The remote control handset of your TV is de-
signed to control all the functions of the
model you selected. The functions will be
described in accordance with the menu sys-
tem of your TV.
Functions of the menu system are de-
scribed in Menu System section.