Sony FD Trinitron KV-28FC60-Z - Handbuch (Seite 26)

24
Smartlink
Smartlink is a direct link between your TV set and a VCR.
For Smartlink you need:
A VCR which supports Smartlink, NexTView Link, Easy Link or Megalogic.
A fully-wired 21-pin SCART cable to connect your VCR to Scart Y 2/ j 2
connector.
The features of Smartlink are:
Tuning information such as the channel overview are downloaded from
the TV set to the VCR.
With NexTView you can programme your VCR easily.
Direct TV recording: While watching TV you just need to press just one button
on the VCR to record this programme.
For more information on Smartlink please refer to the Instruction Manual of
your VCR.
Remote control of other Sony equipment
Using the buttons underneath the cover of the remote control you can
control other Sony equipment.
1 Open the cover of the remote control.
2 Set the selector VTR 1234 DVD according to the equipment you want to control:
VTR 1
Beta VCR
VTR 2 8 mm VCR
VTR 3 VHS VCR
VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000)
DVD Digital Video Disk
3 Use the buttons on the remote control to operate the equipment.
If your video equipment has a COMMAND MODE selector, set this
selector to the same position as the VTR 1234 DVD selector on the
TV remote control.
If the equipment does not have a certain function, the corresponding
button on the remote control does not work.
Optional Equipment