Kompernass PHKS 1450 LASER - Handbuch (Seite 13)

15 GB/IE/CY
Q Tips and tricks
j Use the appropriate marking on the base plate
for the desired cutting angle (the marking can
be found behind the wing screw for the guide
fence
10 ): Right-angled cut = marking 0°,
45°- cut = marking 45°.
j Breaking out of the cut edges of delicate
surfaces, e.g. coated chipboard or doors,
can be avoided by applying masking tape
in advance along the cutting line. This has
the additional advantage that masking tape
shows up the cutting line better than a smooth
surface. An even more effective way of
stopping the cut edges from being broken out
is to clamp a thin piece of wood along the
cutting line, which is then also sawn through.
Q Cleaning
j Clean the device after you have finished using it.
j Use a cloth to clean the outside of the device -
never use petrol, solvents or cleaners.
Q Disposal
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive
2002 / 96 / EC (covering waste electrical and
electronic equipment) and its transposition into
national legislation, worn out electrical power
tools must be collected separately and taken for
environmentally compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Disposal of batteries
Batteries must be recycled in accordance with
Directive 91 / 157 / EEC and must not be disposed
of with household refuse. Battery users are obliged
by law to take all rechargeable and single-use
batteries to a collection point operated by a public
authority or a retailer.
Q Information
Q Service centre
The service centre for your country is shown in the
warranty documentation.
J Have your device repaired only by
qualified specialist personnel using original
manufacturer parts only. This will ensure that
your device remains safe to use.
Preparing for use / Cleaning / Disposal / Information