Kompernass KH 4405 - Handbuch (Seite 6)

- 6 -
Inserting credit cards:
• Open the safety flap over the cutter opening for
CD/Credit cards e .
• Insert the credit card from above into the middle
of the CD/Credit card cutter opening e . You
can only shred one credit card at a time. ALWAYS
insert them into the CD/Credit card cutter opening
e with the broad side leading. If you do not, the
magnetic strip will not be destroyed.
Note: Always insert the credit card into the
middle of the cutter opening
e . If you do not,
the shredding process will not start!
Inserting a CD:
• Insert the CD from above into the middle of the
CD/Credit card cutter opening e . You can only
shred one CD at a time.
ƽ
Warning!: NEVER place a finger into the
central hole of a CD when you are feeding it
into the appliance.
Clearing a material blockage:
• Press and hold the switch
w in position should
the item to be shredded become jammed.
The appliance now goes into reverse and the
material to be shredded is returned.
• Place the switch w into position (OFF) as
soon as the jammed item is returned.
Switching the appliance off:
• To switch the appliance off, move the switch
w
into the middle position (OFF).
Emptying the waste
container
• Empty the waste container t / u regularly.
• Dispose of the waste material in an environmen-
tally responsible manner.
Emptying the large waste container
(Paper)
ƽ
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the
appliance.
• Remove the cutter attachment q from the large
waste container t .
• Remove the small waste container u at the front
of the large waste container t , so that it does
not fall out.
• Empty the large waste container t and then put
everything back together again.
Emptying the small waste container
(Plastic)
• Remove the small waste container u from the
front of the large waste container t to empty it.
• Replace it after emptying it.
Notice regarding overheating of the
appliance:
If it overheats, the appliance switches itself off auto-
matically.
ƽ
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
• Empty the waste containers t / u .
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position .
IB_KH4405_E6002_UK_3.qxd 17.08.2007 11:49 Uhr Seite 6