Kompernass KH 4405 - Handbuch (Seite 8)

- 8 -
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
Troubleshooting
If the material to be shredded jams:
This means that you have attempted to feed too
much material into the appliance
(max. 5 sheets 80g/m
2 paper, max. 1 credit card,
max. 1 CD/DVD).
• Place the switch
w in position should the item
to be shredded become jammed. The appliance
now goes into reverse and the material to be
shredded is returned.
• Place the switch w in position (OFF), as
soon as the jammed item is returned.
If the appliance suddenly ceases opera-
tion:
This means that the appliance has overheated and
the automatic safety cut-out has activated itself.
ƽ
Important: Remove the power plug from
the wall socket to avoid an unintended starting
of the appliance
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position .
If the appliance doesn`t allow itself to
be switched on:
• Check that the plug is correctly connected to a
wall socket.
• Try out a different wall socket.
• The appliance is probably defective. Have the
appliance checked by qualified specialists.
When the appliance is switched on,
however, the shredding process will
not start:
• The appliance has overheated and triggered the
automatic safety switch-off.
ƽ
Important: Remove the power plug from
the wall socket to avoid an unintended starting
of the appliance.
• Allow the appliance to cool down.
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position .
The cutter attachment q is not correctly placed.
• Place the cutting attachment q in the correct
position.
IB_KH4405_E6002_UK_3.qxd 17.08.2007 11:49 Uhr Seite 8