Kompernass KH 2202 - Handbuch (Seite 11)

Snooze Function
Pressing the SNOOZE e button interrupts the alarm tone for 8 minutes.
After these 8 minutes, the alarm tone is repeated. Place the switch l ALARM
On/Off to “OFF“ to completely switch off the alarm function.
Projection
Attention! When used properly, the radiation from the projection of the display is
not at all dangerous! However, avoid looking directly into the light beam
and do not aim the beam at other persons or at animals.
To display the correct time on the wall or the ceiling, the hinged projection
element must be swung forwards and the room must be appropriately darkened.
1. Place the switch Projection On/Off k to position ON.
2. Set the projection element as desired. The time is projected onto the required
position. Projection distance approx. 40cm - 3m.
3. Adjust the clarity of the projection with the projection focus d .
Background lighting for the display and projection
Pressing the button Projection/Display Illumination r activates the display
illumination and the time projection for approx. 10 seconds.
Cleaning
• Keep the appliance and the ventilation openings clean at all times.
• Fluids may not, under any circumstances, penetrate into the interior of
the appliance.
• Use a soft cloth to clean the appliance housing.
• Never use detergents or solvents that could damage plastics.
- 11 -
IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 11