Lenovo T545 - Handbuch (Seite 19)

ENGLISH
7
To use the Plug and Play feature in Windows 2000, files should be loaded
from the IBM Monitor Installation diskette.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot
into Microsoft Windows2000.
4. Open the D ISPLAY P ROPERTIES window by clicking on S TART , S ETTINGS ,
C ONTROL P ANEL and then double clicking on the D ISPLAY icon.
5. Select the S ETTINGS tab.
6. Select the A DVANCED button.
7. Select the M ONITOR tab.
8. Select the P ROPERTIES button.
9. Select the D RIVER tab.
10.Open the U PGRADE D EVICE D RIVER W IZARD window by clicking on U PDATE
D RIVER and then select the N EXT button.
11.Select the “Display a list of the known drivers for this device so that I can
choose a specific driver” and then select the N EXT button.
12.Insert the Setup diskette into drive A: and select the H AVE D ISK button.
13.Select OK.
14.Choose IBM T545H monitor and select OK. The files will be copied
from the diskette to your hard drive.
15.Close all open windows and remove the diskette.
16.Reboot the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Setup Diskette for Microsoft®Windows®2000 Professional
This section must be
completed before
continuing with the
Microsoft Windows2000 Auto
Setup on page 8.
i On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality. IBM recommends
using either 1024 x 768 at a
refresh rate of 60Hz or 640 x
480 at a refresh rate of 60Hz.